Description

The Miller Multimatic 220 AC/DC Multiprocess welder is a hobbyist and small shop's dream! Provides the freedom to weld any process; MIG, Flux-Cored, Stick, and AC/DC TIG - with one portable, powerful welder. Demonstrates excellent arc quality on both 120 or 240 Volt power! Setup and switching processes is fast and easy!

All in One

Take on more projects with one machine that has MIG, DC stick, and AC/DC TIG!

MIG: 24 ga. - 3/8" Steel 18 ga. - 3/8" Aluminum
DC Stick: 16 ga. - 3/8" Steel
AC/DC TIG: 24 ga. - 1/4" Steel and Aluminum

Easy to Use

Automatically determines the polarity. Work is always connected to the bottom right receptacle. MIG gun and TIG torch can stay connected at the same time.
Automatically switches to the right process. Just hit the trigger or the foot control and the machine automatically changes, eliminating the need to manually change processes.
Automatically recalls the settings from the last process used.

Color LCD with Auto-Set Elite

Auto-Set Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels. Can be used on multiple materials and all processes with the ability to fine-tune your settings. Simple to set up and use. User-friendly 3.5-inch color LCD display with intuitive connection setup images.

Pro-Set (TIG and Stick manual modes)

Pro-Set eliminates the guesswork when setting weld parameters. Simply adjust the control until Pro-Set appears on the display and the number turns blue.

AC Balance (AC TIG) - controls the cleaning action (Pro-Set 75%)
AC Frequency (AC TIG) - controls the width of the arc cone (Pro-Set 120 Hz)
Pulse (DC TIG) - helps focus the arc for increased stability, penetration, and travel speed (Pro-Set 100Hz)
DIG (Stick) - lets you tailor the arc characteristics for a wide range of applications (Pro-Set 30% 7018 electrodes)

Robust, angled wire drive with Quick Select Drive Roll

Wire drive system designed for easily changing one wire type/diameter to another. Quick Select drive roll offers three grooves — two for different size solid wires and a third for flux-cored wire.

Two shielding gas connections

Two connections so both gases can be left connected to the machine, no switching needed. One connection for MIG gas and one for TIG gas. The Miller Dual Cylinder Rack Cart (951770) can also be purchased separately to conveniently hold both cylinders.

Portable

220 weight

Weighing only 56 pounds. The Multimatic 220 AC/DC can go where the work is, plus the added convenience of one machine versus two or more. Handles on the top allow the machine to be easily moved around the shop or garage.

Versatile - Operates on 120V or 240V Power

Miller MVP multi voltage plugs both 110 and 240

The Multi-voltage plug (MVP) easily connects to common 120-volt or 240-volt power outlets — no tools required.

Simply choose the plug that fits the receptacle and connect it to the power cord.

14-pin controlled operator alternatives

The standard 14-pin connector on your Multimatic 220 AC/DC lets you choose your control for a customized experience, whether it’s a foot control, fingertip control, or wireless foot control.

Dependable Arc Starts

Provides High-Frequency, non-contact arc starting to eliminate tungsten and material contamination time after time.

Wide range of TIG adjustability

AC Balance - adjustable from 60-80%
AC Frequency - adjustable from 60-150Hz
DC Pulse - adjustable from Off - 150 pulses per second (PPS)
TIG Post-Flow - adjustable from Auto - 25 seconds
Lift-Arc and high frequency starts
Tungsten size selection

Generator Compatible

The Multimatic 220 will be able to operate and provide full output when powered by generators with 10000 Watt (10K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.

Fan-On-Demand

The units cooling system operates only when needed to reduce noise, energy consumption, and limit the amount of contaminants pulled through the machine. It also features built in Thermal Overload Protection to power the machine down if the airflow becomes blocked or the duty cycle is exceeded.

6010 Stick Electrode Capability

Superior Stick arc performance even on the difficult-to-run electrodes like E6010.

Miller True Blue Warranty

Included with Product

Power source
6.5 ft power cord with MVP plugs for 120V and 240V
10 ft MDX™-100 MIG Welding Gun
13 ft cable electrode holder and 25 mm Dinse-style connector
12.5 ft Weldcraft A-150 (WP-17) TIG torch with 25 mm Dinse-style connector
RFCS-14 HD foot control with 20 ft cord
10 ft work cable with clamp and 25 mm Dinse-style connector
Two flow gauge regulators and gas hoses for argon and AR/CO2 mix
Hobart spool of .030" solid wire
Two contact tips for .030" wire
Quick Select drive roll for .024" or .030/.035" solid wire, and .030/.035" flux-cored wire
AK2C TIG torch accessory kit
Material thickness gauge - 229895
Hook-and-loop cord wraps

Watch our review video for a closer look.

Specifications

Click the image below to view the full Spec Sheet.

Baker's Bundle Includes

Baker's Bundle

Miller MDX 100 MIG Consumable Kit -.030-.035- 1299MDX100
Miller Protective Cover - 301524
MIG Welding Plier
Stainless Steel Curved Handle Brush
Carbon Steel Curved Handle Brush

MDX Consumable Kit

Miller AccuLock .030 tips 10pk - T-M030
Miller AccuLock .035 tips 10pk - T-M035
Miller Thread On Brass 1/2" Flush Nozzles- 2pk - NS-M1200B
Miller AccuLock Diffusers -2pk - D-M100
Miller Sticker
Baker's Gas Sticker

*ADD IN DROPDOWN

Best Selling Equipment

Best Selling Plasma Cutters

FR Shirt Sale

Top Brands

Metabo Best Sellers

Top Brands

Deals by Brand

Military & First Responders

Search By Category

Category

Weld My World - Welding News

Categories

Search

Weld My World - Welding News

Welding Starter Guide: Choosing the Right Wires / Alloys for MIG Welding

Overview of Stick Welding