Miller Multimatic 220 AC/DC Multiprocess Welder and all of the accessories that come with it

Miller Multimatic 220 AC/DC Multiprocess Welder - 907757

$4,285.00 $5,426.53
Skip to product information
Miller Multimatic 220 AC/DC Multiprocess Welder and all of the accessories that come with it
  • Miller Multimatic 220 AC/DC Multiprocess Welder and all of the accessories that come with it
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Close up of the Miller multimatic 220 welder body
  • Inside the spool bay of the Miller Multimatic 220 showing the drive roll system
  • Close up of the Miller Multimatic 220 LCD display and controls of the front of the welder.
  • Close up of the MIG and TIG gas connections on the back panel of the Miller Multimatic 220
  • Miller multimatic 220 welder with the MIG torch, TIG torch, stick holder, ground clamp, and foot pedal.
  • https://youtu.be/Q5ypqaXA10g
  • Miller 220 large LED screen and simple auto-set technology
  • Miller Multimatic 220 AC/DC Multiprocess Welder and all of the accessories that come with it
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
    • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
    • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
    • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
    • Close up of the Miller multimatic 220 welder body
    • Inside the spool bay of the Miller Multimatic 220 showing the drive roll system
    • Close up of the Miller Multimatic 220 LCD display and controls of the front of the welder.
    • Close up of the MIG and TIG gas connections on the back panel of the Miller Multimatic 220
    • Miller multimatic 220 welder with the MIG torch, TIG torch, stick holder, ground clamp, and foot pedal.
    • https://youtu.be/Q5ypqaXA10g
    • Miller 220 large LED screen and simple auto-set technology
  • Miller Multimatic 220 AC/DC Multiprocess Welder and all of the accessories that come with it
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
  • Close up of the Miller multimatic 220 welder body
  • Inside the spool bay of the Miller Multimatic 220 showing the drive roll system
  • Close up of the Miller Multimatic 220 LCD display and controls of the front of the welder.
  • Close up of the MIG and TIG gas connections on the back panel of the Miller Multimatic 220
  • Miller multimatic 220 welder with the MIG torch, TIG torch, stick holder, ground clamp, and foot pedal.
  • https://youtu.be/Q5ypqaXA10g
  • Miller 220 large LED screen and simple auto-set technology
Miller Multimatic 220 AC/DC Multiprocess Welder - 907757
Rebate $600
Free Gift

Miller Electric

Miller Multimatic 220 AC/DC Multiprocess Welder - 907757

$4,285.00 $5,426.53

Add Accessories

Total : $4,285.00

Rebate navy blue hand bag money $600 Rebate
Free Gift -or- Bonus

Description

The Miller Multimatic 220 AC/DC Multiprocess welder is a hobbyist and small shop's dream! Provides the freedom to weld any process; MIG, Flux-Cored, Stick, and AC/DC TIG - with one portable, powerful welder. Demonstrates excellent arc quality on both 120 or 240 Volt power! Setup and switching processes is fast and easy!

All in One
Miller Multi process

Take on more projects with one machine that has MIG, DC stick, and AC/DC TIG! 

  • MIG: 24 ga. - 3/8" Steel 18 ga. - 3/8" Aluminum

  • DC Stick: 16 ga. - 3/8" Steel

  • AC/DC TIG: 24 ga. - 1/4" Steel and Aluminum

Easy to Use

Miller Quicktech

  • Automatically determines the polarity. Work is always connected to the bottom right receptacle. MIG gun and TIG torch can stay connected at the same time.

  • Automatically switches to the right process. Just hit the trigger or the foot control and the machine automatically changes, eliminating the need to manually change processes. 

  • Automatically recalls the settings from the last process used.

Color LCD with Auto-Set Elite
Color LCD

Auto-Set Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels. Can be used on multiple materials and all processes with the ability to fine-tune your settings. Simple to set up and use. User-friendly 3.5-inch color LCD display with intuitive connection setup images.

Pro-Set (TIG and Stick manual modes)
Pro-Set Feature

Pro-Set eliminates the guesswork when setting weld parameters. Simply adjust the control until Pro-Set appears on the display and the number turns blue.

  • AC Balance (AC TIG) - controls the cleaning action (Pro-Set 75%)

  • AC Frequency (AC TIG) - controls the width of the arc cone (Pro-Set 120 Hz)

  • Pulse (DC TIG) - helps focus the arc for increased stability, penetration, and travel speed (Pro-Set 100Hz)

  • DIG (Stick) - lets you tailor the arc characteristics for a wide range of applications (Pro-Set 30% 7018 electrodes)

Robust, angled wire drive with Quick Select Drive Roll

Wire drive system designed for easily changing one wire type/diameter to another. Quick Select drive roll offers three grooves — two for different size solid wires and a third for flux-cored wire.

Two shielding gas connections

Two connections so both gases can be left connected to the machine, no switching needed. One connection for MIG gas and one for TIG gas. The Miller Dual Cylinder Rack Cart (951770) can also be purchased separately to conveniently hold both cylinders.

Portable

220 weight

Weighing only 56 pounds. The Multimatic 220 AC/DC can go where the work is, plus the added convenience of one machine versus two or more. Handles on the top allow the machine to be easily moved around the shop or garage. 

Versatile - Operates on 120V or 240V Power
Miller MVP multi voltage plugs both 110 and 240

The Multi-voltage plug (MVP) easily connects to common 120-volt or 240-volt power outlets — no tools required.

Simply choose the plug that fits the receptacle and connect it to the power cord.

14-pin controlled operator alternatives
14-Pin Connector

The standard 14-pin connector on your Multimatic 220 AC/DC lets you choose your control for a customized experience, whether it’s a foot control, fingertip control, or wireless foot control.

Dependable Arc Starts
High Frequency TIG Start

Provides High-Frequency, non-contact arc starting to eliminate tungsten and material contamination time after time.

Wide range of TIG adjustability

  • AC Balance - adjustable from 60-80%

  • AC Frequency - adjustable from 60-150Hz

  • DC Pulse - adjustable from Off - 150 pulses per second (PPS)

  • TIG Post-Flow - adjustable from Auto - 25 seconds

  • Lift-Arc and high frequency starts

  • Tungsten size selection

Generator Compatible
Generator Compatible

The Multimatic 220 will be able to operate and provide full output when powered by generators with 10000 Watt (10K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.

Fan-On-Demand

The units cooling system operates only when needed to reduce noise, energy consumption, and limit the amount of contaminants pulled through the machine. It also features built in Thermal Overload Protection to power the machine down if the airflow becomes blocked or the duty cycle is exceeded. 

6010 Stick Electrode Capability 
6010 icon

Superior Stick arc performance even on the difficult-to-run electrodes like E6010.

Miller True Blue Warranty
True Blue

Included with Product

  • Power source
  • 6.5 ft power cord with MVP plugs for 120V and 240V
  • 10 ft MDX™-100 MIG Welding Gun
  • 13 ft cable electrode holder and 25 mm Dinse-style connector
  • 12.5 ft Weldcraft A-150 (WP-17) TIG torch with 25 mm Dinse-style connector
  • RFCS-14 HD foot control with 20 ft cord
  • 10 ft work cable with clamp and 25 mm Dinse-style connector
  • Two flow gauge regulators and gas hoses for argon and AR/CO2 mix
  • Two contact tips for .030" wire
  • Quick Select drive roll for .024" or .030/.035" solid wire, and .030/.035" flux-cored wire
  • AK2C TIG torch accessory kit
  • Material thickness gauge - 229895
  • Hook-and-loop cord wraps

Watch our review video for a closer look. 

*ONLY ONE Foot control if you upgrade wireless if not wired. 

Specifications

Click the image below to view the full Spec Sheet.

Miller Multimatic 220 AC/DC

    Multimatic 220 Review

    OTHERS ALSO BOUGHT

    Shop all

    Overall rating: 4.9375 / 5 from 96 reviews.

    AI Generated Review Summary

    The Miller Multimatic 220 AC/DC Multiprocess Welder is a versatile and powerful tool for hobbyists and small shops, offering MIG, Flux-Cored, Stick, and AC/DC TIG welding processes. It features an easy-to-use interface, automatic process switching, and a robust wire drive system. The welder is portable, weighing only 56 pounds, and operates on both 120V and 240V power. It includes a 10 ft MIG welding gun, 13 ft cable electrode holder, and 12.5 ft TIG torch with a 25 mm Dinse-style connector. Customers praise the machine's performance and the excellent service provided by Baker's Gas.

    Summary topics

    • Customer Service (11%): Customers keep praising the fast shipping and knowledgeable customer service provided by Baker’s Gas.
    • Machine Performance (25%): Many customers expressed satisfaction with the machine, stating that it is great, compact, and works well.
    • Welder Quality (28%): A significant number of customers brought up that this welder is great and the best they have owned.

    Review topics: ["quality","deal","weight","works","shipping","welder","service","price","machine","settings","bakers","gift","mig","setup","switching","videos"].

    Review highlights

    • "Best price, fast delivery, knowledgeable customer service." — Matt B.
    • "Outstanding welder, great experience ordering and shipping." — Robert V.
    • "Great light weight welder" — Gavin V.

    Reviews

    "Everything was great but the stick stinger. Cheaply made to where the handle just slips right off. Otherwise amazing machine and in a big fan of bakers gas company."

    — Oscar (5/5)

    Best Deal At BAKERSGAS. COM

    "Thank you for making videos I watched a few before buying. Ask them about their upgrade to wireless they do a few times a year. They honored for me and saved me a few hundred bucks. Also best deal around on consumables. Delivered to me on time so convenient. Best online welding retailer."

    — Jordan (5/5)

    "Excelente"

    — Jorge (5/5)

    Good Service!

    "Good Service!"

    — Chet V. (4/5)

    Great buy

    "Great machine, fits my needs"

    — WESLEY P. (5/5)

    5 Stars

    "5 Stars"

    — Francisco R. (5/5)

    Multimatic 220

    "Absolutely love this machine! I don’t know what else to say other than I wish I could have gotten a Miller factory rebate on it as it was expensive for me. I purchased it three days too soon not knowing Miller would offer a rebate for the 220 after the 1st of January, could have saved another $750 on welder and cart that was ordered. Bakers gas prices were still better than anything I could find locally and Bakers is far more knowledgeable and informative. Just wanted to say thanks to Bakers for their awesome videos and infro that helped me make a decision on my purchase. I am very happy with this machine it works perfectly for the metal sculptures that I have been creating."

    — Jeff B. (5/5)

    "Miller is the cream of the crop. Wouldn't use anything else. Great machine"

    — David (5/5)

    "I used to work at a fab shop and loved every bit of fabricating. Just bought the Multimatic 220 for some home projects and couldnt be happier with it. Miller products are second to none."

    — Trevor (5/5)

    Awesome

    "Awesome"

    — Frank N. (5/5)

    Q&A

    Will this run a spool gun
    Yes it will. Either the Spoolmate 150 (301272) or the 100 (300371)
    What aluminum spool gun is a direct fit to this machine
    The Spoolmate 100 and 150 spool gun are direct connect to the Miller 220.
    Where is the Millermatic 220 made
    Hey, thanks for reaching out it is assembled in Appleton, WI and designed/engineered there. We had the opportunity to visit and walk the production line! Let us know if you have any questions or need a quote. Right now we are doing a free gift with purchase.
    Is this welder compatible with a water cooler for GTAW welding torch?
    Yes, it is possible to add a water cooler to a Miller 220 machine. You would need a water-cooled TIG torch, a water cooler unit, and a Dinse adapter to connect the torch to the machine. The Coolmate 1.3 and Coolmate 3 are examples of compatible water coolers.
    Where can I find dealer in odessa tx
    Hey David, We are located in OH, MI, and IN. We ship for free if you order from our website. This machine comes with a free upgrade to a wireless foot pedal as well.