Auto-Line Power Management Technology
Allows for any input voltage hookup (120±240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
In the shop or at the job site at 13 pounds, the handle/shoulder strap allows the end user to easily move from location to location.
Provides TIG arc initiation without the use of high frequency.
Full Function Remote Control
For precise amperage control for critical welds on thin materials.
Power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine.
Thermal Overload Protection
Helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.
Built-in Gas Solenoid
Eliminates the need for a bulky torch with a gas valve.
For more precise control when presetting or monitoring welding amperage.
Eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. Simply select the feature and adjust until Pro-Set appears on the display.
Pulsing can increase puddle agitation, arc stability and travel speeds while reducing heat input and distortion.
For non-contact arc initiation that reduces tungsten and material contamination.
Selectable Trigger Configuration
Allows the operator to choose standard or 2T trigger method to meet the application.
Adaptive control provides positive arc starts without sticking.
Detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.
Included with Product
6.5' Primary Cords for 120V and 240V
X-CASE - provides protection in transport and storage
RCCS-6M remote fingertip control (195184)
Stick electrode holder with 13 ft. (4 m) cable and 25 mm Dinse-style connector
Work clamp with 10 ft. (3 m) cable and 25 mm Dinse-style connector
Weldcraft A-150 (WP-17) 12.5 ft. (3.8 m) TIG torch with connector
Flow gauge regulator with gas hose
AK2C accessory kit with short back cap, nozzles, collets, collet bodies, and 2% ceriated tungsten electrodes (.040, 1/16, and 3/32 in.)
Adjustable Handle/Shoulder strap