Add Accessories
Miller Spectrum 375 X-TREME XT30 (120/240 Volts, 1-Phase) - 907529
Miller Spectrum 375 X-TREME XT30 (120/240 Volts, 1-Phase) - 907529
SKU: MIL907529
Baker's Friday Special
Description
Miller Spectrum 375 X-Treme Plasma Cutter can cut up to 3/8" thick mild steel and is portable enough to go anywhere at only 19 lbs and with the MVP 120/240 volt adapter.
Cut Capacity
Rated: 3/8 in. (9.5 mm)
Sever: 5/8 in. (15.9 mm)
X-TREME Versatility with Auto-Line
Auto-line provides state of the art flexibility to the end user. Automatically connects connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) Adapters allow connection to 120 or 240 V receptacles without tools—choose the adapter that fits the receptacle and connect it to the power cord.
X-TREME Portability
Only 19 lbs with a shoulder strap allows the user to move easily from location to location. Miller's X-CASE provides protection during transport and storage.
XT30 Torch & Quick Connect Work Lead
Ergonomic handle with unique no-slip grip, increased comfort, safety trigger and improved cable flexibility.
Electronic Pilot Arc-Controller
Automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
LVC line voltage compensation
Provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
Generator Compatible
Full output when powered by 7,000 watt (7K) or higher generator such as the Miller Bobcat or Trailblazer series generators. Limited output will occur when used with smaller generators
Power Factor Correction
Uses input power more efficiently, ultimately using less energy.
Auto-Refire Technology
Provides the ultimate convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. No need for manual re-triggering which could cause user hand fatigue.
Post Flow Cooling to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.
Easy to use
LED indicators for pressure, power, cup and temperature allow faster troubleshooting.
Starts without high-frequency so it will not interfere with or damage controls or computers
Included with Product
-
Plasma cutter
-
XT30 hand-held torch with 12 ft (3.7 m) cable.
-
Heavy-duty work clamp with 12 ft (3.7 m) cable
-
X-CASE Storage Case
-
10 ft (3 m) MVP power cord
-
Consumables box with 2 electrodes, 2 tips, 1 air deflector, and air fitting
-
MVP plugs 5-15P (115 V, 15 A), 6-50P (230 V, 50 A)
Review Video
Customer Reviews
Ratings & Reviews
100% Recommend this item
