New! XMT 350 MPa expands the process capability of the XMT Series, with built-in Pulsed MIG operation. MPa stands for MIG, Pulse, advanced arc control. The advanced arc control provides:
Improved pulsed MIG welding.
More control over the puddle and weld bead using SharpArc.
More robust and stable arc at very low arc lengths.
Reduces heat input
Welds on a wider range of material thicknesses.
XMT 350 MPa System - Add the new S-74 MPa wire feeder to receive the benefits of a synergic system. As you increase or decrease the wire feed speed, the pulse parameters automatically match the right amount of power output to the wire feed speed.
Auto-Line Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.
350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.
Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.
Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.
Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.
Process selector switch reduces the number of control setup combinations without reducing any features.
Large, dual digital meters are easy to view and presettable to ease setting weld output.
Pulsed MIG capabilities with optional Optima control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission.
Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
Optional 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc.
Optional gas solenoid for TIG welding.
Fan-On-Demand operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
Lift-Arc start provides TIG arc starting without the use of high frequency.
Wind Tunnel Technology Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
Adaptive Hot Start for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.
LVC Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± 10%.
Miller's True Blue Warranty delivers unparalleled peace-of-mind.