Miller Maxstar 161 STL Standard Package - 907710

Description

Auto-Line Power Management Technology
Allows for any input voltage hookup (120±240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.

• Portable in the shop or at the job site at 13 pounds, the handle/shoulder strap allows the end user to easily move from location to location.

• Lift-Arc provides TIG arc initiation without the use of high frequency.

• Full Function Remote Control for precise amperage control for critical welds on thin materials.

• Fan-On-Demand power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine.

• Thermal Overload Protection helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.

• Built-in Gas Solenoid eliminates the need for a bulky torch with a gas valve.

• Digital Meter for more precise control when presetting or monitoring welding amperage.

• Single Amperage Range allows operator to accurately set amperage on both 120 or 240 Volt primary power.

• Simple-To-Use Operator Interface Inverter-based, DC power source providing only the necessary controls in a compact machine.

• Hot Start adaptive control provides positive arc starts without sticking.

• Low OCV Stick is a simple design that reduces the open- circuit voltage to 12±16 volts when the welding power source is not in use. This circuit design is now built into the Maxstar 161 STL eliminating the need for add-on voltage reducers.

• Power Factor Corrected (PFC) for optimum performance especially on 120 Volts - reduces nuisance breaker tripping.

• Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.

• Superior Stick Arc Performance even on the difficult-to-run electrodes like E6010.

Specifications

Click the image below to view the full specification sheet

Included with Product

• Power Source

• 6.5' Primary Cords for 120V and 240V

• Stick electrode holder with 13 ft. (4 m) cable and 25 mm Dinse-style connector

• Work clamp with 10 ft. (3 m) cable and 25 mm Dinse-style connector

• One air-cooled TIG torch connector (195234)

• Adjustable Handle/Shoulder strap

Accessories