Description

Easy to use machine to increase efficiency and productivity for manufacturing and fabrication users. 7" Color LCD screen featuring Auto-Set™ Elite, Electronic Parameter chart, and Trigger Program Select. This all-in-one welder connects to any North American input power. Welds up to 1/2” aluminum, stainless and mild steel

The Ultimate Pulse Capable MIG Welder

The Miller Electric Millermatic 355 is the first single- or three-phase power Millermatic that welds material from 22 gauge to 1/2 in thick in a single pass. Perfect for fabrication, manufacturing, maintenance and repair.

The Millermatic 355 is easy to us, increasing efficiency and productivity for all users. 7" Color LCD screen featuring Auto-Set Elite, Electronic Parameter chart, and Trigger Program Select. This all-in-one welder connects to any North American input power. Welds up to 1/2" aluminum, stainless and mild steel.

Pulsed-MIG Advantage

Whether welding aluminum, steel or stainless steel, improving productivity by 30, 50 or 100% and saving tens of thousands of dollars are typical results when switching to Pulsed-MIG with the Millermatic 355. Lower heat input for less distortion on thin materials, less spatter, and better penetration on thicker materials. 

Simple and Portable

7-inch color LCD display ensures proper machine set up and parameter selection. This reduces set up time and increases weld time. Machine is portable when removed from the EZ-Latch cart. Machine weighs only 99 lbs! 

EZ-Latch running gear easily is secured to the machine and can be removed without any tools. Simply loosen the latch retaining knob and rotate latches to remove the machine from the running gear. 

Auto-Set Elite & Program Mode

Miller Electric predefined weld settings to increase ease of use and ensure the job is done right for users of all skill levels. Also reduces set up time for welds. 

Program Mode allows you to save and recall your favorite weld settings with the click of a button. This mode allows for more productivity, consistent quality by welders of all skill level, and fast set up!

Powerful and Versatile

Capabilities include MIG, pulse MIG, and fluxed cored welding. Plus direct connection push pull gun. Direct connection and ability to use Miller Push-pull gun or Spoolgun.

Input voltage selection switch provides ability to utilize any single or three phase North American power (208, 240, 460, 575 V) It will show error code if in the the wrong input. 

Generator Compatible

The Millermatic 355 can operate at full output when powered with a 19,000 watt or higher generator. Limited output will occur when used with a smaller generator.

Trigger Program Select

No need to walk back to the machine to change weld settings. Simply tap the gun trigger to select or change programs.

Included with Product

• Millermatic 355 power source
• 15 ft. (4.5 m) 300-amp Bernard BTB MIG gun with Bernard AccuLock S consumables for .035/.045 in. (0.9/1.2 mm) wire
• 10 ft. (3 m) work cable with clamp and 50 mm Dinse-style connector
• Flow gauge regulator and gas hose for argon or AR/CO2 mix
• 035/.045 in. (0.9/1.2 mm) reversible drive rolls
• Extra .035 and .045 in. (0.9 and 1.2 mm) contact tips
• Material Thickness Gauge
  
• EZ-Latch™ Running Gear
• Chain to secure gas cylinder

Specifications 

Video

Accessories