Description

Dual power. Ease of Use. Superior arc at best value with 210 amps of weld output. 

The Handler 210i is a powerful and versatile machine. Dual voltage input power gives you the flexibility to weld on either 120 or 240 volts. Connect to common 120-volt input power or 240-volt without the use of any tools. Simply choose the plug that fits the receptacle. 

Weld as thin as 24 gauge up to 3/8 inch in a single pass with a broad output range of 30–210 amps. Easily run thicker materials with multiple passes. All while weighing only 26 pounds. 

Quick and easy setup with Quick Select™ drive rolls which offer three grooves — two for different sizes of solid wire and a third for flux-cored wire. 

Easy to set and adjust for different materials and thicknesses — features infinite wire and voltage control. Fine tune wire speed to each whole number and voltage to the 1/10th for maximum flexibility of operation. 

Features 

• Segmented display: Makes settings easier to see, understand, and adjust with confidence. 
• Infinite wire speed and voltage control: Get precise tuning for optimal welding.
• Lightweight and compact: Easy to transport, store, and move around at just 26 pounds.
• Dual voltage: Weld in a variety of space son either 120 or 240 V — no tools necessary.
• Rated Output: 210 A at 24.5 VDC, 25% duty cycle.
• Mild Steel Thickness Range: 24 ga.–3/8 in.
• Spool Gun Ready: No additional control box or adapter is required to connect the SpoolRunner™ 100 spool gun.

Included with Product

• 10 ft. (3 m) HR-100 MIG gun with ergonomic, rubber-padded handle 
• 10 ft. (3 m) work cable with clamp 
• Power cord with adapter for 120 V and 240 V 
• Built-in gas solenoid valve and dual-gauge regulator with gas hose 
• Extra .030 and .035 in. (0.8 and 0.9 mm) contact tips 
• Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire 
• Material thickness gauge
• Specifications

Click the image below to view the full Spec Sheet.