Dimensions of Specialty Gas Cylinders

 
Specialty Gas Cylinder Dimensions

Size

DOT
Specification

Nominal Dimensions

(Excluding Valve and Cap)

Average
Tare Weight

Average
Internal Volume
  in (cm) lb (kg) ft³ (L)

High Pressure

        
300 3AA2400 9 x 55 (23 x 140) 137 (62) 1.76 (49.8)
200 3AA2265 9 x 51 (23 x 130) 119 (54) 1.55 (43.9)
80 3A2015 7 x 33 (18 x 84) 57 (26) 0.56 (15.9)
35 3A2015 7 x 19 (18 x 48) 26 (12) 0.26 (7.4)
10 3AA2015 4 x 17 (10 x 43) 9 (4) 0.10 (2.8)
LB02 3E1800 2 x 12 (5 x 30) 2 (0.7) 0.015 (0.43)
LB/LBX 3E1800 2 x 12 (5 x 30) 2 (0.9) 0.015 (0.43)
E 3AA2015 4 x 26 (10 x 66) 14 (6) 0.16 (4.5)
3HP 3AA6000 10 x 51 (25 x 130) 300 (136) 1.49 (42.2)
2HP 3AA3500 9 x 51 (23 x 130) 187 (85) 1.53 (43.3)

Low Pressure

              
65 3A480 10 x 49 (25 x 124) 85 (39) 1.93 (54.7)
B 3A480 10 x 36 (25 x 91) 90 (41) 1.28 (36.2)
C 3A480 8 x 22 (20 x 56) 33 (15) 0.53 (15.0)
150LP 4AA480 15 x 52 (38 x 132) 160 (73) 4.46 (126.3)
350LP 4BW240/260 16 x 50 (41 x 127) 75 (34) 3.83 (108.5)
1/4 TON 4BW240/260 22 x 48 (56 x 122) 167 (76) 7.64 (216.4)
65380LP 4BA240/260 12 x 45 (30 x 114) 48 (22) 2.31 (65.4)
1/2 TON 4BW240/260 30 x 57 (76 x 145) 315 (143) 16.00 (453.0)
LP2.5 4B240 9 x 17 (23 x 43) 14 (6) 0.4 (11.3)
LP5 4B240 12 x 18 (30 x 46) 18 (8) 0.77 (21.8)

C2H2

             
380 8/8AL 12 x 41 (30 x 104) 185 (84) 2.36 (66.8)

HCL, Bulk Electronic Gases

              
Y 3A1800 24 x 90 (61 x 229) 1,108 (503) 15.83 (448)

H2S

              
TON 106A800X 30 x 82 (76 x 208) 2,254 (1,022) 25.82 (731)

SO2, C2H5Cl, Cl2, CH3Cl

              
TON 106A500X 30 x 82 (76 x 208) 1,400 (635) 25.64 (726)

Aluminum

              
300A 3AL2216 10 x 55 (25 x 132) 90 (41) 1.64 (46.4)
150A 3AL2015 8 x 48 (20 x 122) 48 (22) 1.04 (29.5)
80A 3AL2216 7 x 33 (18 x 84) 32 (15) 0.56 (15.8)
33A 3AL2216 7 x 16 (18 x 41) 15 (7) 0.21 (5.9)
9A 3AL2015 4.5 x 15 (10 x 26) 9 (4.4) 0.095 (2.68)
*These dimensions are not exact. They should not be used for engineering drawings or equipment specifications. 

Additional Supply Modes -

Bulk Specialty Gases and Chemicals

Many specialty gases and chemicals can be supplied in bulk quantity. Products available in bulk quantity are identified throughout the catalog by the symbols shown below:

Tank trucks are used for over-the-road transportation of cryogenic liquids. Liquid product is then transfilled to cryogenic storage tanks at customer locations

Tube trailers (T.T.) provide over-the-road shipment of high-pressure gases, gaseous chemicals, and gas mixtures. The trailers serve as on-site storage systems at customer locations.

Cryogenic Liquid Cylinders

Cryogenic liquids such as nitrogen and helium are supplied in dewars (low-pressure cryogenic tanks) for larger requirements near customers’ point of use.

MicroBulk

As your need for higher gas volumes increases, time lost to changing out cylinders and gas lost to venting liquid dewars can take a bigger bite out of your bottom line. MicroBulk delivery is the perfect way to get the cost efficiencies of bulk deliveries, but in smaller volumes. MicroBulk delivery system eliminates the hassles and extra expense of cylinders and liquid dewars and provides a safer work environment.

If you are considering large-volume supply, a representative from Baker's Gas can discuss your requirements and the economics of alternate supply systems. 

Appendix: Cylinder Indentification

Cylinder Specification:
  • DOT—Department of Transportation (previously ICC – Interstate Commerce Commission), which is the regulatory body that governs the use of cylinders.
  • Specification of the cylinder type of material of construction (e.g., 3AA).
  • Service or working pressurein pounds per square inch (e.g., 2,265 psig).

Cylinder Serial Number

Date of Manufacture:

  • This date (month-year) also indicates the original hydrostatic test.
Neck Ring Identification:
  • The cylinder neck ring displays the name of the original owner of the cylinder.
Retest Markings:
  • The format for a retest marking is: Month – Facility – Year – Plus Rating – Star Stamp.
  • The + symbol (Plus Rating) indicates that the cylinder qualifies for 10% overfill.
  • The  symbol (Star Stamp) indicates that the cylinder meets the requirements for 10-year retest, instead of a 5-year retest.
Bar Code Label:
  • The bar code label provides a unique cylinder identifier and is used by computer systems to track cylinders throughout the fill process. As an optional service, we have the capability of tracking cylinders to and from customers.

Cylinder Manufacturer’s Inspection Marking

Cylinder Tare (Empty) Weight:

  • This value may be preceded by the letters TW.

D.O.T. Classifications

Your compressed gas cylinders will have one or more of the hazardous materials placards shown below. The United States Department of Transportation (US DOT) in Title 49 Section 173 of the United States Code of Federal Regulations (49 CFR 173) requires the use of hazardous materials placards when shipping compressed gases. These hazardous materials placards are indended to indicate the general hazards associated with the contents of the gas in the cylinder. For complete hazardous material information, refer to the Material Data Safety Sheet (MSDS).

 

Specialty Gas Cylinder Dimensions Source: Airgas, Inc.

FOLLOW US @BAKERSGAS