There’s nothing efficient about chasing power across a rooftop. Hauling more gear and extension cords than metal. Sweating more setup than arc time. But that’s the reality most welders face at every turn.
You adapt, troubleshoot, and bend the workflow to fit. But what if you didn’t have to?
It’s time to meet the machine that changes the game, the Miller Venture 150 S.
The Portability Problem
Portability is the never-ending nuisance in the back of every welder’s mind. Welding machines are designed to work off stable electricity. There are power cords to plug in. Extension cords to strategize.
Constant currents, power conversion, and heat regulation must be controlled and perfectly executed; otherwise, the weld suffers. There are alternative welding power sources. Generators run on fuel, but they’re noisy and unreliable. Carts and trailers add mobility, but need smooth ground. And the electricity still has to go with you.
Remote job sites and locations don’t come with grid access guaranteed. Emergency repairs demand fast action. Tight spaces restrict your angles and accessibility. Cords are still in the way. Welding outside isn’t usually optional, and it’s never accommodating.
A lot is working against your portability, and they’re all tied to your welding machine. Welding is rarely predictable, but it should always be the priority.
The heart of every weld should be the task at hand. But machines restrict productivity, control, and artistic expression. Portable welding did all it could, with cords. Because until now, this was the only way.
Rechargeable Lithium-Ion Battery That Actually Works
The Miller Venture 150 S was built differently–for portability without compromise.
The portability promise lets welders down. Runtime on existing market batteries is a joke. Retrofitted consumer-grade lithium-ion batteries (repurposed from drills and power tools) can’t provide stable amperage or consistent voltage. They die mid-welding pass, take 3-5 hours to recharge, and only last for a few hundred cycles. But the Miller Venture 150 S rethinks the retrofit.
From cell chemistry to thermal management, every detail in the Venture’s battery is specifically engineered for welding’s demands. It’s built to handle surge loads, arc starts, and sustained amperage. It delivers strong, safe, smooth, and reliable power. And it’s actually ready to move with you.
This beast of a 400Wh lithium-ion battery is rechargeable over 1000 times. It charges to 95% in an hour. The fast-charging feature will fill the battery in just 30 minutes. Hot-swappable battery packs can be replaced without any tools. No more downtime and waiting when your battery is dead. Just swap in another charged battery unit and keep on welding.
The Miller Venture 150 S is a portable welder that finally means it.
Reliable Power Output That Doesn’t Flinch
Miller’s new machine doesn’t just promise. It performs.
The perfect bead requires continuous operation (and a steady hand). But typical batteries overheat, throttle, and shut down randomly. Most portable power uses lower amperage ratings or thermal designs that can’t handle sustained welding. Even corded welders protest under pressure. But Miller means business.
The Miller Venture 150 S delivers 100% duty cycling at maximum output. No sacrificing power for portability. Finally, there’s a machine that handles welding nonstop at full amperage. No more stutter starts, skipping, or weak welds. Just pure, portable power that doesn’t fail.
The Venture holds its arc steady and churns out raw DC welding power you’re not expecting. It supports Stick or TIG welding methods with control, compatibility, and welder-friendly perks across the board:
-
150A Stick / 160A TIG — peak power with zero flinch
-
Hot Start™ — smooth stick ignition, no sticking
-
Lift-Arc TIG — no HF, no contamination
-
6010 compatible — handles dirty, rusty, tough
-
Stick-Stuck & Low OCV mode — smart safety, better handling
-
Fan-On-Demand™ — stays cool, works longer
The Venture 150 S puts out power that doesn’t flinch with features that stand on their own. Plus, each battery comes with a 1-year (1,000 charge) warranty, and the Venture 150 S is backed by Miller’s 3-year warranty. This is reliable power output, field-ready for everywhere.
Compact Design That Moves With You
How far can your welding machine follow you?
“Compact” leaves a lot to be desired in the world of welding. Gas-powered machines will run without cords, but they tip the scales near 300lbs. Corded inverter welders are lighter, but still tethered to external power, long leads, and breaker boxes.
The Miller Venture 150 S redefines compact. It is light, balanced, and easy to carry. It packs serious power into a seriously small frame.
-
Only weighs 26.5lbs (light enough to sling over your shoulder)
-
Handles on batteries & the power source (convenient and safe for lifting)
-
Padded shoulder strap (hands-free transport)
-
Rubber bumpers and snap on feet (rough-handling-proof)
-
Low-profile & modular (stows, stacks, and replaceable parts)
From rooftops to trailer patch jobs, the Venture 150 S is ready to go where corded welding machines can’t. No leads to drag. No breakers to reset. No back-breaking loading and lugging. Just a machine that finally gets what portable means.
Save Time Where It Counts
With the Miller Venture, you can finally experience truly cordless welding.
Dragging generators out to finish (or start) a weld is time-consuming. They try to compensate for mediocre power, but still need cords, fuel, and patience. Electricity takes time to find, secure, and set up safely. Tear down takes even longer. Being tethered to external power is a costly limitation.
But what if your welding machine saved time, instead of wasting it?
With a surprisingly fast setup and tear-down (plus arc-sustaining power throughout), the Miller Venture 150 S respects your time like no other. It operates without:
-
Generators to haul or fuel
-
Cords to manage or load
-
Recharge downtime
-
Wasted motion between job sites
-
Slow starts
-
Frequent Stops
The speed and agility of the Miller Venture 150 S saves you 250 hours annually. That’s more time for welding and less time on logistics.
The Machine Welders Have Been Waiting For
The Miller Venture 150S doesn’t just solve the portability problem; it rewrites the rules.
In a world where cordless, compact, portable, and powerful welding machines are already supposed to exist–it’s time for another level of welding-on-the-go. Embracing the lithium-ion rechargeable battery revolution and a welder-first power plan, welding will never be the same.
Flawless performance, smooth power delivery, lean and light, the Miller Venture 150S is leading the rebellion. Rethink every welding limitation you’ve ever had. Because none of them apply anymore.
Own the Miller Venture 150 S and weld without boundaries.
Order now and join the revolution at Baker’s Gas.
