Plasma Cutting

Discover the New Lincoln Tomahawk 30 Air from Lincoln Electric: Your Portable Plasma Cutting Solution

Discover the New Lincoln Tomahawk 30 Air from Lincoln Electric: Your Portable Plasma Cutting Solution

If you're in the market for a cutting-edge, portable plasma cutting system, look no further than the new Lincoln Tomahawk 30 Air from Lincoln Electric. This state-of-the-art tool is designed for fast and precise cutting, making it an essential addition to any workshop or job site. Here's why the Tomahawk 30 Air should be your next upgrade.

Ready to Cut Right Out of the Box

The Tomahawk 30 Air arrives fully equiped and ready to go, saving you time and effort. Whether you're cutting through metal in your garage or working on a remote job site, this machine ensures you get the job done quickly and efficiently. 

Built-In Air Compressor for Ultimate Portability

One of the standout features of the Tomahawk 30 Air is its built-in air compressor. This feature makes it incredibly versatile, allowing you to operate in environments where external compressed air isn't available. For those situations where you have access to an external compressor, the Tomahawk 30 Air easily connects, providing added flexibility and convenience.

Features that set the Tomahawk 30 Air Apart

  • Continuous Output Control: This feature lets you fine-tune the arc to match different material thicknesses, ensuing precise and clean cuts every time.¬†
  • Touch Start System: Initiate the plasma arc reliably without high frequency, making the start-up process smoother and safer.
  • Rapid Arc Restrike: Seamlessly cut through gaps, even on expanded metal, thats to the quick arc¬†restrike capability.
  • Front Panel Purge Control: Easily set the air flow rate without initiating the plasma arc, simplifying the setup process.
  • Cool Operation, Long Consumable Life: The enhanced swirling airflow keeps the electrode and tip cool, significantly extending the life of consumables.
  • Added Safety: Lincoln's parts-in-place system ensures the correct installation of consumables and the torch, enhancing user safety.
  • Engine Drive Compatibility: Power your Tomahawk 30 Air in remote locations using a Lincoln Electric recommended engine-driven welder or generator.

Reliable and Durable Consumable Wear

As with any high-performance tool, consumable parts like the electrode and nozzle will wear over time. The Tomahawk 30 Air make it easy to maintain optimal performance by indicating when these parts need replacing. Look for a green erratic arc as a sign to replace the electrode immediately. For the best results, it's recommended to replace the KP2842-1 electrode and KP2842-6 Nozzle 30A as a complete set.

Recommended Engine Drives for Remote Operations

For those who need to operate the Tomahawk 30 Air in remote locations, ensure your engine-driven generators meet the following conditions:

  • AC Waveform peak voltage: Below 400 volts
  • AC Waveform frequency: Between 55 and 65 Hz
  • RMA voltage of the AC waveform: Always greater than 208VAC

Compatible models include:

What's Included with Your Tomahawk 30 Air

When you purchase the Tomahawk 30 Air, you receive everything you need to start cutting immediately:

  • Lincoln Tomahawk 30 Air Plasma Cutter
  • Internal air compressor (with external air connection)
  • LC30 PlasmaTorch with a 10 ft. (3 m) cable
  • Air regulator and pressure gauge
  • Internal water separator
  • Work clamp and cable
  • Spare consumables
  • Shoulder strap
  • Input power cord

Check out the Lincoln Tomahawk 45

Looking for a little more power under the hood? Lincoln has a step up from the 30 Air -- the Lincoln Tomahawk 45. This machine will deliver clean and consistent cuts while still providing the same power and portability of the Tomahawk line. You can check out our blog post here for more information.

Upgrade Today with Baker's Gas and Welding

Experience the convenience, precision, and reliability of the Lincoln Tomahawk 30 Air for yourself. For questions, quotes, or more information, reach out to Baker's Gas and Welding by calling 877-930-5690 or emailing support@bakersgas.com. Upgrade your cutting capabilities today with the Tomahawk 30 Air!

Drew A.

Published:
Regular price $1,999.00 USD
Sale price $1,999.00 USD
Regular price $1,999.00 USD
Lincoln Tomahawk 30 AIR Plasma Cutter with 10 ft (3.0 m) Hand Torch - K5457-1
Regular price $2,319.00 USD
Sale price $2,319.00 USD
Regular price $2,319.00 USD
Lincoln Tomahawk 45 Plasma Cutter 20' Hand Torch - K5458-1
Regular price $368.00 USD
Sale price $368.00 USD
Regular price $547.49 USD
Lincoln Viking 3350 ADV Matte Black 5th Gen Welding Helmet - K3034-5
Regular price $30.00 USD
Sale price $30.00 USD
Regular price $266.00 USD
Baker's Viking 3350 5th Gen Helmet Bundle

Leave a comment

Please note, comments need to be approved before they are published.