Miller XMT 350MPa Multiprocess Pulse MIG w Dinse/Aux Power - 907366011

Description

• New! XMT 350 MPa expands the process capability of the XMT Series, with built-in Pulsed MIG operation. MPa stands for MIG, Pulse, advanced arc control. The advanced arc control provides:
• Improved pulsed MIG welding.
• More control over the puddle and weld bead using SharpArc.
• More robust and stable arc at very low arc lengths.
• Reduces heat input
• Welds on a wider range of material thicknesses.

• XMT 350 MPa System - Add the new S-74 MPa wire feeder to receive the benefits of a synergic system. As you increase or decrease the wire feed speed, the pulse parameters automatically match the right amount of power output to the wire feed speed.

• Auto-Line Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.

• 350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.

• Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.

• Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.

• Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.

• Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.

• Process selector switch reduces the number of control setup combinations without reducing any features.

• Large, dual digital meters are easy to view and presettable to ease setting weld output.

• Pulsed MIG capabilities with optional Optima control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission.

• Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.

• Optional 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc.

• Optional gas solenoid for TIG welding.

• Fan-On-Demand operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.

• Lift-Arc start provides TIG arc starting without the use of high frequency.

• Wind Tunnel Technology Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.

• Adaptive Hot Start for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.

• LVC Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± 10%.

• Miller's True Blue Warranty delivers unparalleled peace-of-mind.