Built for professionals in the MRO and light manufacturing/fabrication segments who want a smaller, versatile multiprocess welder with intuitive setup to increase efficiencies and productivity.
MDX-250 MIG Gun w/ AccuLock S Consumables
AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New Rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock S contact tips provide superior Spray and Pulsed MIG arc performance.
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn't be done in the past.
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels. Available for MIG, pulsed MIG, stick and DC TIG processes with the ability to fine-tune your settings.
Program mode allows easy save and recall of favorite weld settings
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene. Save up to 4 programs.
For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208/240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Auto-Line eliminates the need to manually link the machine and reduces set up time.
Capabilities include MIG, pulsed MIG, flux-cored, DC stick, DC Lift-Arc TIG, and Pulsed TIG.
Portability - Machine only weighs 84 lb.
Weight is reduced by more than 50 percent compared to the Millermatic 252.
Optional EZ-Latch running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
The Multimatic 255 will be able to operate and provide full output when powered by generators with 12000 Watt (12K) output or higher. Limited output will occur when used with smaller generators.
2 Drive Roll Industrial Wirefeed System
Cast Aluminum 2 Drive Roll system with interchangeable driverolls provides consistent wire feed from the start of the weld to the finish.
Baker's Bundle Includes
Baker's Bundle Includes:
- Miller MDX 250 Consumable kit - .030-.035 -1299MDX250
- Miller Protective Cover
- 11# Spool of ER70S-6 Wire .030
- 11# Spool of ER70S-6 Wire .035
- Carbon Steel Curved Handle Brush
- MIG Welding Plier
- Nozzle Gel
- Blue Demon Acetone Surface Wipe
Total value $350! You just pay $245!
Limited time only value bundle!
Miller AccuLock S .030 tips 10pk - T-A030CH
Miller AccuLock S .035 tips 10pk - T-A035CH
Miller Thread Flush Nozzles 5/8"- 2pk -N-A5800C
Miller AccuLock S Diffuser -D-M250
Total value $90! You pay just $75!
Included with Product
Multimatic 255 Power source with 10 ft industrial power cord
15 ft (4.6 m), 250-amp MDX 250 MIG Gun with Bernard AccuLock S consumables for .035" / .045"
10 ft (3 m) cable w/ electrode holder and 50 mm Dinse-style connector
10 ft (3 m) work cable w/ clamp and 50 mm Dinse-style connector
Flow gauge regulator and gas hose for argon or AR/CO2 mix
.035/.045 in reversible drive rolls
Extra contact tips (Acculock S)
Material Thickness Gauge
EZ-Latch dual cylinder running gear with elevated gun rack
Multimatic 255 TIG Kit
Two chains to secure gas cylinders
Original price $90.00Current price $75.00
Description This consumable kit is compatible with the MDX-250 MIG Gun. The MDX-250 MIG Gun is the current standard on the following machines: Mul...View full details
Description The choice of professionals for exceptional aluminum welding results in industrial or commercial applications. Easy to Use Wire feed s...View full details
Description The Miller Spoolmatic gun is choice of professionals for exceptional aluminum welding results in industrial or commercial applications...View full details
Original price $172.00Current price $155.00
Description The Miller protective cover protects the finish of your Millermatic 255, Multimatic 255 or Multimatic 235 machine. Cover is designed s...View full details
Original price $1,463.00Current price $1,270.00
Description Most economical and reliable spool gun in its class! Designed specifically for home hobbyists & light fabricators. Rated at 160 am...View full details
Original price $2,498.00Current price $2,167.00
Description PROMO CODE: LITE400 Miller XR-Aluma Pro Lite MIG gun 300948 is an 175 amp push pull gun designed to directly connect to your Miller ma...View full details
Original price $3,313.00Current price $2,869.00
Description New lighter XR-Aluma-Pro gun 301568 reduces fatigue, improves output and is rugged to withstand industrial environments. Higher Ampera...View full details
Original price $3,563.00Current price $3,085.00
Description New lighter XR-Aluma-Pro gun 301569 reduces fatigue, improves output and is rugged to withstand industrial environments. Higher Ampera...View full details
Description Product Features: Optimized Wire-Feeding - Contact tip is aligned and centered with the liner lock when the diffuser is tightened creat...View full details
Description Miller AccuLock S Series .030 contact tips are suitable for your Miller MDX-250 or MDX-250 EZ-Select MIG gun. The S Series are specific...View full details
Description Miller AccuLock S Series .035 contact tips are suitable for your Miller MDX-250 or MDX-250 EZ-Select MIG gun. The S Series are specific...View full details
Description Miller AccuLock S Series .045 contact tips are suitable for your Miller MDX-250 or MDX-250 EZ-Select MIG gun. The S Series are specific...View full details
Description Miller AccuLock S Series .023 contact tips are suitable for your Miller MDX-250 or MDX-250 EZ-Select MIG gun. The S Series are specific...View full details
Description Miller AccuLock S MIG nozzle is designed for the Miller MDX-250 welding MIG gun. Nozzle is all copper with 5/8 inch bore with a flush t...View full details
Description Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes: 20 ft (6...View full details